Titanium CVD Set (4) For ARRMA 1/7 & Typhon | Perfect Pass RC

IMPORTANT NOTE

You will receive an extra set of Steel CVDs with this purchase of Titanium CVD set.

For example, if you purchase 1 Titanium CVD set, you will receive 4 x Titanium CVDs AND 4 x Steel CVDs.

For extreme bashing / speed run / drag racing, we recommend swapping the stub axle and inner barrel from the Titanium set so the end result is Titanium shaft with Steel stub axle and steel inner barrel.

Since titanium on titanium friction is prone to galling, for extreme scenarios we recommend that titanium will not rub onto titanium. Therefore we recommend exchanging the titanium stub axle and inner barrel with steel.

Please note that you can also use the remaining pieces (steel CVD shafts and titanium stub axles and titanium inner barrel) and enjoy an extra set of premium CVDs.

PLEASE WATCH THE VIDEO.

You will automatically be provided with an extra FREE set of Steel CVDs.

Built for drivers who demand maximum strength with minimum rotating mass.

**Stock CVDs are steel 5MM - Perfect Pass RC Titanium CVDs are 6MM!

STRONGER - LIGHTER - FASTER.

WHY USING CVDs IN YOUR RC CAR VS STOCK DOG BONES?

To allow for smoother power delivery and less vibration, we have decided to offer our customers a full set of 4 CVDs instead of the stock 2 CVDs in the front and 2 dog bones in the rear (dog bone = regular axle).

📦WHAT'S INCLUDED

• (4) Titanium CVD Axles (PP-M074)
• (4) Tiatnium CVD Stub Axle (PP-M076)
• (4) CVD Coupler (PP-M077)
• (8) Tool Steel Pins

IMPORTANT NOTE

In the Arrma Limitless V2 our CVDs will fit only with a normal size hex found in the Arrma Infraction 6S, since the Arrma Limitless (V2 version) comes with an extended rear stub axles and extended rear hexes in order to make the rear 4mm wider. So our CVDs will fit but a normal 17mm hex should be used.