Perfect Pass Monster T Servo For 1/6 Cars (Fit Traxxas X-MAXX) Insane Speed Power & Accuracy!

Greatest xrt servo available better than the piggie wiggie

WORTH EVERY PENNY!!!!! Would be the first thing I upgrade next build. Absolute game
Changer!

Love it, running it at 7.5v with a CC BEC 2.0 WP to give my BEC some safety amp head room and already it will turn the wheels on carpet with ease, the stock servo would not do that.

Just make sure if you are running a external BEC you don't have the positive wire going back into the receiver. The stock Traxxas receiver can only handle 6v. I only have the signal wire and a ground wire from the servo going into my Traxxas receiver. I had to solder the positive wire and an additional ground wire and wire those into my BEC.

You can run this servo on the stock Traxxas receiver without a BEC and have it be simply plug and play, but you will only be able to give the servo 6v, (anything more then 6v going into a stock Traxxas receiver might damage it). Even at 6v this servo would still be a nice upgrade over stock, but you will be leaving some servo performance on the table.

So far I am very happy with this servo, it was expensive but the quality speed and power and not having to cut my chassis made it worth it.

I've tried several high-torque servos over the years, but the Perfect Pass 80kg is the first one that completely transformed my Traxxas XRT Ultimate.
The real test for any servo on the XRT isn't the stock tires, it's the Sledgehammers and especially the Paddle tires in sand. The stock servo simply couldn't keep up under load, but the Perfect Pass had no problem controlling both.
I power mine with a dedicated external 10A UBEC at 8.4V, allowing the servo to deliver its full performance. The improvement in steering authority, speed, and holding power is immediately noticeable, even when the truck is under heavy acceleration or driving through deep sand.
Honestly, after this experience, Perfect Pass has become my go-to servo brand. I now install one in every new RC I buy before I even run it for the first time.
Highly recommended if you're looking for a genuine upgrade rather than just a higher torque number on paper.

PERFECT !!!!

It fitted in the Xmaxx very well, no mucking around with anything, it’s very smooth and fast 💪😃

Absolutely love these servos have one in xmaxx and Xrt paired with upgraded speed controller set on 8 4 bolts is night and day difference

Love it, love how it’s built and serviceable.

Fast and powerful.

Put it on my X Maxx, the X Max only can put out 6 V, was pretty good but not any better than the better TRAXXAS servos, install the BEC and adjusted the voltage to 8 V, all I can say is wow the servo is magnificent, anybody installing a BEC on an X MAXX be sure and connect the BEC Power to the negative side of the ECU main battery cables. Otherwise you will burn the ground wire if you use the other connector. Little bit of a learning curve on my part couldn’t find any information to this, but I finally figured it out and wow, the, the monster T is a fantastic servo.

One of the best around. Stuck it in my #deathrail awsome upgrade

Perfect fit!!! Really woke up the steering.. fast response and very strong!! Running it at 8.4v!!!

Fits perfectly. And so much more power then stock servo. Fast delivery.

Beast of a servo! Its a must have! Don't think about it... Just just do it...

Amazing servo. Definitely worth the money. Want to get them for my primal raminator now

I changed the gears in my Xmaxx's servo, then swapped in a 2085x, but both those upgrades were a waste of money. This Monster T servo from Perfect Pass is the only way to go. It's so much faster and more powerful than the Traxxas servos. I'm running it at 7.4v in a truck with spools front, back and center and it performs phenomenally well. If my son's Maxx ever needs a new servo I'm definitely installing one of these.

I was skeptical about the price, but this is definitely a quality product. The speed and power with which it moves is truly impressive and I love that I could just bolt it right in without having to modify anything. I’m excited to do some more testing with it, but my initial run was very impressive and. does not even compare to the stock servo on my Xmaxx. I definitely recommend it! More to come on TikTok showcasing this servo @rclife

This thing is amazing! This is the second Monster T that I've bought. The first one I had in an XRT and now this time I realized that I could fit this thing in my Maxx so I had to go ahead and try it. I don't really believe you can have servo overkill but if you can this is definitely that. No hesitation whatsoever. It moves the smaller scale Magmas and Sledgehammers on carpet as if they aren't even there. My endpoints are set to 105 in both directions. I couldn't be happier. It's the best my Maxx has ever steered by far. I have a Max 6 in it with the 4990 motor so its 1/6 scale electronics in a 1/10 scale truck... just the way my God intended it. Thank you Perfect Pass!

This thing is a beast now, was running the 56kg one and it was good but with this 80kg monster it’s unbelievable. And thanks for the car air freshener smells great!