Castle Link V4 USB Programming Kit for Cobra Series

Castle Link V4 is the new 32-bit based USB adapter for Cobra series.

**For all other ESCs, please purchase the Castle Link V3 USB adapter.

Program your Cobra Series ESC on your Windows® PC (10 or higher) with the Castle Link V4 USB programming kit.

• Set up of programmable options with point and click ease
• View your current program settings
• Download and view the ESC's onboard data logs
• Update ESCs with new firmware (if available)

⚙️SET-UP INSTRUCTIONS

1. Download the Castle Link 2 software from Castle's Downloads area.
2. Run the Castle Link 2 installer and follow on-screen prompts.
3. Plug the Castle Link V4 adapter into the provided Type-C USB cable.
4. Connect the ESC's receiver lead to the Castle Link adapters prongs; the brown wire connects to the pin marked "GND" or "-".
   

📦WHAT'S INCLUDED

• Castle Link V4 adapter
• Type C USB cable
• Castle Decal sheet

Castle Link contains a proprietary interface adapter and standard USB cable with Type-C port.

💻SYSTEM REQUIRMENTS

• Windows® PC (Windows 10 or higher)
• Available USB Type-A port
• Castle Link 2 software (download from Castle Creations website)